The failure rate of the electric valve product is very low during use. But sometimes there may be such an electric actuator failure, some faults are often not a problem in the device itself. It may be installed or improper use. At this time, our technician is needed to investigate, and the problem will minimize Chen Ben at the same time.
Electric actuator failure scenario 1: Motor does not start
Test Method: Test, Whether the power supply and voltage are normal. Check if the capacitor has a raised phenomenon, if there is a sudden burst, he will follow the new product. The motor is demolished and detected, and the motor gear is inspected whether the motor gear is biting.
Electric actuator fault scenario 2: When running, the motor suddenly stops
Test method: Check the line to see if the power is shorted. Check if there is foreign matter in the tube. If foreign matter is contained, remove the valve and remove foreign matter.
